Flexible Badges

Frequently Asked Questions

• What is a flexible metallic police badge?

  A flexible metallic police badge is a badge that looks like a metal badge but is made of flexible material. The term "metallic" indicates that it resembles metal in appearance, though it isn't actually made of metal. These badges have become a popular alternative to traditional patches and direct embroidery, offering a more authentic and professional look.

• Are Flexible Metallic Police Badges more affordable than direct embroidery?

  Yes, they are. High-quality direct embroidery can cost between $20 and $25 per garment, while one flexible badge can be transferred between multiple garments. Not only do flexible badges look better than embroidered badges, but they also offer significant cost savings for police departments.

• Are Flexible Metallic Police Badges more cost-effective than patches?

  While the initial cost of a flexible metallic badge is higher than a typical patch, it is more cost-effective in the long run. Flexible badges can be transferred between garments using a hook & loop attachment, meaning one badge can serve multiple uniforms. In contrast, patches are permanently sewn onto a single garment. Besides offering a more professional appearance than embroidered patches, flexible badges ultimately save money over time by reducing the need for multiple patches.

• Do flexible metallic badges replace real metal badges?

  No, flexible metallic badges do not replace real metal badges. The metal police badge is an iconic symbol of law enforcement and holds deep sentimental value throughout an officer's career. While metal badges are irreplaceable, flexible metallic badges offer a practical alternative to sewn-on patches or embroidery for uniforms like polo shirts or tactical vests where metal badges aren’t practical. These flexible badges closely replicate the look of metal badges, maintaining a professional appearance in situations where wearing a metal badge isn't feasible.

• Will a flexible badge set off a metal detector?

  No, flexible badges will not set off a metal detector, making them popular in corrections, event security, and court security settings.

• What are Smith & Warren Flexible Badges made of?

  Smith & Warren Flexible Badges are made from Thermoplastic Polyurethane (TPU), a durable material known for its flexibility, strength, and resistance to abrasion, chemicals, oil, low temperatures, and water. With proper care, these badges can be worn for an extended period.

• Can my current metal badge be replicated as a Smith & Warren Flexible Badge?

  Almost any metal badge can be replicated as a Smith & Warren Flexible Badge using our advanced technology. While there are few limitations, we’ve successfully found solutions in cases where challenges arise. If you send us a picture of your badge, we can confirm whether it can be replicated as a flexible badge.

• Do you have a minimum order quantity?

  Yes, the minimum order quantity is 10 pieces. The order can include a mix of metal finishes, ranks, badge numbers, etc., as long as all badges come from the same mold. Smaller quantities are possible but may not be cost-efficient and can be quoted upon request.

• How do I care for my Flexible Metallic Badges to ensure they last?

  For badges with hook & loop backing, remove them before washing. If the badge is heat-sealed, turn the garment inside out and wash in water under 90°F. Air drying is recommended, but if using a dryer, select a low-temperature delicate cycle.

• Can Flexible Badges be machine washed?

  Yes, flexible badges can be machine washed. Turn the garment inside out and wash in water under 90°F. We recommend hang drying, but if you use a dryer, select the low-temperature delicate cycle.

   

• Can Flexible Badges be dry cleaned?

  No, we do not recommend dry cleaning flexible badges.

• Can I iron a garment with a flexible badge attached?

  Yes, but avoid ironing directly over the flexible badge.

• What Backing Options do you Offer?

  Flexible Metallic Badge can be supplied with the following backing options:

  • Hook & Loop
  • Heat Transfer/Heat Seal
  • 3M Double Sided Tape (Hard Surface Application)
• What is the Warranty?

  Warranty Terms:

  The Flexible Metallic Badge comes with a 1-year warranty covering manufacturer defects. This warranty does not cover normal wear and tear or work performed by garment decorators. While Smith & Warren provides instructions and technical assistance to decorators, we are not responsible for the quality of their work.

• Heat Press Instructions:

  (Do not remove the clear membrane until Step 6)

  1. Preheat: Preheat the platen and garment for 5 seconds.
  2. Position: Place the flexible badge on the garment using the tacky adhesive for positioning.
  3. Orientation: If using top heat, flip the garment so the adhesive faces the heat platen. If using bottom heat, do not flip.
  4. Protection: Place a 1/8" thick foam pad over the badge to protect it.
  5. Press:
     • Temperature: 300 to 320°F
     • Pressure: 30 to 35 PSI
     • Time: 15 to 20 seconds
  6. Remove Membrane: Tear off the clear membrane.
• How long do you keep molds?

  Each department's badge mold is kept for 36 months between orders. To retain the mold, a minimum order of 10 pieces must be placed at least once every 36 months. If no order is placed within this period, the mold will be discarded, and a new one will need to be created at the customer’s expense. The 36-month storage period resets with each new order.

• What metal finishes are available for flexible badges?

  We offer a wide range of metallic finishes, including all popular metals in shiny, matte, and antique options. Additionally, we provide special finishes for awareness campaigns, such as pink, blue, and autism awareness patterns.  

• Do I need to send you my badge to make it into a flexible badge?

  No, you don't need to send us your badge. We just need a clear photo of your badge along with its height dimension. If needed, we may request additional pictures, but typically one good photo of the front is sufficient. If you use multiple finish combinations, it can be helpful to send a picture of a badge in each finish.

• Can I send in artwork, or do you need a photograph of our badge to create a flexible badge?

  We strongly recommend sending a photograph of the actual metal badge. While artwork can be similar, the final badge often differs from the design. When converting 2D artwork into a 3D badge, many changes occur. To ensure your flexible badge closely matches your metal badge, a photograph is the best option.

• If I prefer to send in my badge, can I?

  Yes, you can send us your badge if you prefer. While a photograph is usually sufficient, we can photograph the badge ourselves and replicate it. Your badge will be handled with care and returned to you with your order.

• What factors influence the cost of Smith & Warren Flexible Badges?

  The unit cost of a flexible badge varies based on size, quantity, and finish.

  • Size: Badges typically range from 2.5" to 3.5". A 3.5" badge costs about 20% more than a 2.5" badge.
  • Quantity: Quantity is the biggest cost driver, with substantial discounts for larger orders.
  • Finish: Costs increase with additional metallic finishes. Single-color badges are less expensive than two-tone or tri-tone options.

  Prices range from $30.00 to $60.00 for 10 pieces, $9.50 to $28.00 for 100 pieces, and $7.00 to $20.00 for 500 pieces.

• How much does a mold cost for a flexible badge?

  The cost for a mold is typically $250.00. If a 3-stage mold is required, the cost is $350.00. We will let you know if a 3-stage mold is necessary after reviewing a picture of your badge. The mold is a one-time investment, and we keep it for 36 months between orders. As long as you place an order for flexible badges at least once every three years, the mold investment will be a one-time cost.

• Can I purchase extra loops to sew onto my shirts?

  Yes, you can order extra loops. They will be die-cut to match the size of your flexible badge. Purchasing additional loops is a cost-effective way to maximize the use of your flexible badges.

• My badge is made of multiple layers. Can you duplicate a multi-layer badge, and will it still look 3-dimensional?

  Yes, our advanced technology can accurately replicate multi-layer badges, preserving the layered look you value. While the flexible badge will be slightly thinner than a metal badge, it will retain a 3-dimensional appearance and the visual depth of your original design.

• What makes Smith & Warren flexible badges the best in the industry?

  Smith & Warren flexible badges excel due to our deep expertise and advanced technology. As a leading manufacturer of metal badges, we bring a thorough understanding of badge design to our flexible badges. Our extensive archive of artwork, patterns, and photographs allows us to accurately replicate any metal badge with a high level of detail and a 3-dimensional appearance. We offer unmatched customizability without the limitations of stock designs, high mold fees, or large minimum orders. Our badges provide a cost-effective, durable, and versatile alternative to patches and embroidery, reflecting our commitment to quality and innovation.